3D Printed Turbo Impeller VS Dyson Motor
With Meltio's Dual-wire DED 3D printing head, you're sure that cheaper costs won't come at the expense of quality, since Meltio uses an array of sturdy metal wires, that are 5x cheaper than powder, giving you an Iron man- strong end result!
This centrifugal water pump is the best water pump I have ever designed/built/3D printed. The secret behind this insane performance is the closed impeller, usually, these DIY water pumps have semi-open impellers that arent soo efficient.
Turbo impellers, used to convert exhaust gas pressure into rotary motion in turbomachinery, are traditionally made by casting in large lot sizes and require precision machining. This part is manufactured separately - first up the core, #3dprinted with planar slicing, then the blades with non-planar slicing. Integrating the Meltio Engine into a robotic arm allows for the manufacturing of pieces parallel to the original surface, making the robot path aligned with the #printjob's geometry, obtaining cleaner results. Thanks to the geometry freedom this integration provides, #3dprinting a turbine impeller with such steep-angled blades is quick and effortless.
Our metal 3D printing solutions open up a new world of possibilities for designing industrial-grade parts without the need for industrial infrastructure. They are seamlessly integrable into any office environment or university lab and its open material platform enables applications ranging from industrial prototyping, mold and die, one-offs, short runs, to mass manufacturing, maintenance, and repair.
3D Printed Turbo Impeller VS Dyson Motor
With Meltio's Dual-wire DED 3D printing head, you're sure that cheaper costs won't come at the expense of quality, since Meltio uses an array of sturdy metal wires, that are 5x cheaper than powder, giving you an Iron man- strong end result!
This centrifugal water pump is the best water pump I have ever designed/built/3D printed. The secret behind this insane performance is the closed impeller, usually, these DIY water pumps have semi-open impellers that arent soo efficient.
Turbo impellers, used to convert exhaust gas pressure into rotary motion in turbomachinery, are traditionally made by casting in large lot sizes and require precision machining. This part is manufactured separately - first up the core, #3dprinted with planar slicing, then the blades with non-planar slicing. Integrating the Meltio Engine into a robotic arm allows for the manufacturing of pieces parallel to the original surface, making the robot path aligned with the #printjob's geometry, obtaining cleaner results. Thanks to the geometry freedom this integration provides, #3dprinting a turbine impeller with such steep-angled blades is quick and effortless.
Our metal 3D printing solutions open up a new world of possibilities for designing industrial-grade parts without the need for industrial infrastructure. They are seamlessly integrable into any office environment or university lab and its open material platform enables applications ranging from industrial prototyping, mold and die, one-offs, short runs, to mass manufacturing, maintenance, and repair.
No comments:
Post a Comment