Post Top Ad

Friday, September 8, 2023

on video How to connect the filling of 3 elevated tanks with a single electric pump?


 How to connect the filling of 3 elevated tanks with a single electric pump?

float switch is a type of level sensor a device used to detect the level of liquid within a tank. The switch may be used to control a pump as an indicator an alarm or to control other devices one type of float switch uses a mercury switch inside a hinged float.

how does a float switch works

float switch is a type of level sensor a device used to detect the level of

liquid within a tank one pattern uses a reed switch mounted in a tube a float containing a magnet surrounds the tube and is guided by it when the float raises the magnet to the reed switch it closes.

A float switch is a mechanical switch that floats on top of a liquid surface. As the liquid level goes up or down, it moves vertically with the liquid level. This is a type of level sensor and this device is used to detect the level of liquid within a tank. And also float switch may be used to control a pump, as an indicator, an alarm, or to control other devices.

In this video, I have explained about float switch wiring connection to control a water pump.


What is a float switch?

A float switch detects the level of a liquid in a tank. Based on the water level, it will open or close an electrical circuit generally used to pump water in or out of the tank.


How to work a float switch?

A float switch moves with the liquid level up and down vertically. An internal mechanical switch opens or closes an electrical circuit with gravity. Therefore, the electrical circuit can turn on/off equipment, like a water pump.


What does a float switch do?

A float switch monitors the level of a liquid in a tank. It then opens or closes an electrical circuit based on the liquid level and wiring to control external components.

How to install a float switch?

A float switch is installed in a liquid tank. Firstly, a pre-set level is made and can be done with a counterweight. Then, based on a normally open or closed wiring configuration, it will open or close the electrical circuit based on its movement up or down with the liquid level.


How to wire a float switch?

A float switch is wired in either the normally open or normally closed position. A normally open position is open when down (low liquid level) and a normally closed position is closed when down. The open/closed position refers to the electrical circuit.


 How to connect the filling of 3 elevated tanks with a single electric pump?

float switch is a type of level sensor a device used to detect the level of liquid within a tank. The switch may be used to control a pump as an indicator an alarm or to control other devices one type of float switch uses a mercury switch inside a hinged float.

how does a float switch works

float switch is a type of level sensor a device used to detect the level of

liquid within a tank one pattern uses a reed switch mounted in a tube a float containing a magnet surrounds the tube and is guided by it when the float raises the magnet to the reed switch it closes.

A float switch is a mechanical switch that floats on top of a liquid surface. As the liquid level goes up or down, it moves vertically with the liquid level. This is a type of level sensor and this device is used to detect the level of liquid within a tank. And also float switch may be used to control a pump, as an indicator, an alarm, or to control other devices.

In this video, I have explained about float switch wiring connection to control a water pump.


What is a float switch?

A float switch detects the level of a liquid in a tank. Based on the water level, it will open or close an electrical circuit generally used to pump water in or out of the tank.


How to work a float switch?

A float switch moves with the liquid level up and down vertically. An internal mechanical switch opens or closes an electrical circuit with gravity. Therefore, the electrical circuit can turn on/off equipment, like a water pump.


What does a float switch do?

A float switch monitors the level of a liquid in a tank. It then opens or closes an electrical circuit based on the liquid level and wiring to control external components.

How to install a float switch?

A float switch is installed in a liquid tank. Firstly, a pre-set level is made and can be done with a counterweight. Then, based on a normally open or closed wiring configuration, it will open or close the electrical circuit based on its movement up or down with the liquid level.


How to wire a float switch?

A float switch is wired in either the normally open or normally closed position. A normally open position is open when down (low liquid level) and a normally closed position is closed when down. The open/closed position refers to the electrical circuit.

No comments:

Post a Comment

Post Top Ad

Pages