Post Top Ad

Sunday, May 26, 2024

on video 3v to High Power DC to DC Boost 1200W motor running without IC


 3v to High Power DC to DC Boost 1200W motor running without IC

This is converted from 3.7 volt to 12 volt, 30v, 60v DC to DC Boost converter using Irfp250n and Inductor. The IRFP250N is a new generation of high voltage MOSFET family that utilizes an advanced charge balance mechanism for outstanding low resistance and lower gate charge performance. But my mosfet is not original. So you can use it. Irfz44n it ok. But good a powerful 3A Boost Converter. 


Components used in this project:


1. Irfp250n or Irfz44n MOSFET

2. 10K potentiometer

3. Inductor

4. 0.33 Ohm 5W Resistor

5. 3A DIode 

6. 2200uf, 35v Capacitor

We are currently working on a synchronous approach to increase the output power of DC to DC boost converters. This video introduces the concept at a high level. Most of us are tired of Converter power limits, and we have decided to do something about it.


 3v to High Power DC to DC Boost 1200W motor running without IC

This is converted from 3.7 volt to 12 volt, 30v, 60v DC to DC Boost converter using Irfp250n and Inductor. The IRFP250N is a new generation of high voltage MOSFET family that utilizes an advanced charge balance mechanism for outstanding low resistance and lower gate charge performance. But my mosfet is not original. So you can use it. Irfz44n it ok. But good a powerful 3A Boost Converter. 


Components used in this project:


1. Irfp250n or Irfz44n MOSFET

2. 10K potentiometer

3. Inductor

4. 0.33 Ohm 5W Resistor

5. 3A DIode 

6. 2200uf, 35v Capacitor

We are currently working on a synchronous approach to increase the output power of DC to DC boost converters. This video introduces the concept at a high level. Most of us are tired of Converter power limits, and we have decided to do something about it.

No comments:

Post a Comment

Post Top Ad

Pages