Small 12V stereo circuit board with single 6283 IC

 Small 12V stereo circuit board with single 6283 IC

This is a small audio board. You can use it for amplification purposes. It has an inbuilt IC 6283. It works on 12V. You can connect two external speakers with it. It offers 50 to 80 Hz of clear sound quality. It won’t take up much space either. You can use it in small DIY projects where space is an issue. This board can easily amplify the low input signals into much higher output signals that can drive speakers and give you a better and improve sound quality

Today I am going to tell you how can we connect wires of speaker, aux cable, power supply and volume potentiometer in 6283 IC Single channel audio Amplifier board.This audio amplifier board will give 30W output power.

Take All Materials As Shown Below

(1.) Amplifier board - 6283 IC single channel amplifier board. x1

(2.) Speaker - 30W x1

(3.) aux cable x1

(4.) Connecting wires

(5.) Step-down Transformer with rectifier - 12-0-12 2A (For 12V DC Power supply)

(6.) Potentiometer (variable resistor) - 100K

Connect Parts As Picture

Solder wires of all parts as shown in the picture.

Indication -

Black line - GND (-) Wire and

Red/Blue is +ve wire.

Next we have to connect the aux cable wire to the circuit.

Connect +ve wire of aux cable to 1st pin of potentiometer and

connect -ve wire of aux cable to 3rd pin of potentiometer as you can see in the picture.

NOTE: 3rd pin of potentiometer we can say as Ground pin.

Next connect wires in the potentiometer as shown in the picture.

Connect a wire in middle pin of potentiometer and

solder a wire in the ground pin of potentiometer.

This wires is audio output wire.

 Small 12V stereo circuit board with single 6283 IC

This is a small audio board. You can use it for amplification purposes. It has an inbuilt IC 6283. It works on 12V. You can connect two external speakers with it. It offers 50 to 80 Hz of clear sound quality. It won’t take up much space either. You can use it in small DIY projects where space is an issue. This board can easily amplify the low input signals into much higher output signals that can drive speakers and give you a better and improve sound quality

Today I am going to tell you how can we connect wires of speaker, aux cable, power supply and volume potentiometer in 6283 IC Single channel audio Amplifier board.This audio amplifier board will give 30W output power.

Take All Materials As Shown Below

(1.) Amplifier board - 6283 IC single channel amplifier board. x1

(2.) Speaker - 30W x1

(3.) aux cable x1

(4.) Connecting wires

(5.) Step-down Transformer with rectifier - 12-0-12 2A (For 12V DC Power supply)

(6.) Potentiometer (variable resistor) - 100K

Connect Parts As Picture

Solder wires of all parts as shown in the picture.

Indication -

Black line - GND (-) Wire and

Red/Blue is +ve wire.

Next we have to connect the aux cable wire to the circuit.

Connect +ve wire of aux cable to 1st pin of potentiometer and

connect -ve wire of aux cable to 3rd pin of potentiometer as you can see in the picture.

NOTE: 3rd pin of potentiometer we can say as Ground pin.

Next connect wires in the potentiometer as shown in the picture.

Connect a wire in middle pin of potentiometer and

solder a wire in the ground pin of potentiometer.

This wires is audio output wire.