on video How to make a steam engine from a car shock absorber

 How to make a steam engine from a car shock absorber

I am referring to the cylinder section, which is the most important part of steam engines. Cylinder and piston can be called the heart of steam engines. High machine compression should be considered.

I tried to explain to you the many tips for making the steam engine mentioned in the video.

Used materials:

- 25 mm brass rod

- 15 mm brass rod

- 25 mm aluminum bar

- 6mm hexagonal brass rod

- 6 mm iron bar

PLEASE NOTE: it will only be sold in Brazil.

Technical characteristics:

- To start the engine, it is necessary to preheat the boiler;

- The boiler is equipped with a valve that releases excess pressure from the boiler, ensuring user safety;

- The boiler is delivered with a pressure gauge to check the pressure;

- The piston has a diameter of 38 mm and a stroke of approximately 50 mm;

- The weight of the kit is 11,950 (KG);

- Full power power output can reach 7 watts as shown in the video. If it is a more efficient generator, it is possible to improve performance;

It is a great product for school purposes or as a decorative item.

It uses gas as an energy source, accompanies the generator which produces electricity, and it is even possible to recharge 12 volt batteries, with a certain limitation.

 How to make a steam engine from a car shock absorber

I am referring to the cylinder section, which is the most important part of steam engines. Cylinder and piston can be called the heart of steam engines. High machine compression should be considered.

I tried to explain to you the many tips for making the steam engine mentioned in the video.

Used materials:

- 25 mm brass rod

- 15 mm brass rod

- 25 mm aluminum bar

- 6mm hexagonal brass rod

- 6 mm iron bar

PLEASE NOTE: it will only be sold in Brazil.

Technical characteristics:

- To start the engine, it is necessary to preheat the boiler;

- The boiler is equipped with a valve that releases excess pressure from the boiler, ensuring user safety;

- The boiler is delivered with a pressure gauge to check the pressure;

- The piston has a diameter of 38 mm and a stroke of approximately 50 mm;

- The weight of the kit is 11,950 (KG);

- Full power power output can reach 7 watts as shown in the video. If it is a more efficient generator, it is possible to improve performance;

It is a great product for school purposes or as a decorative item.

It uses gas as an energy source, accompanies the generator which produces electricity, and it is even possible to recharge 12 volt batteries, with a certain limitation.