Powerful Induction Stove Circuit

 Powerful Induction Stove Circuit

Powerful Induction Stove Circuit

Some ideas, and experiment can be dangerous.

And for that you don't risk and damage your self

and the Environment, I am a professional in my business

With a lot of experience!

Every video, even that is completed with compliance

With all safety measures. Enjoy the video and eat the sweets.

WARNING:

This video is for demonstration and education purpose only.

Each demonstration presents risks and hazards

that must be fully understood before attempting.

And should be performed only by professionals

Make a very convenient and robust induction heater at home by watching this video

Make a frame according to the top plate size or as you think convenient.

After measuring the center make a horizontal plane to lay the coil on it.

Make appropriate fitting stands for the motherboard and cooling fan. Make sure the cooling fan must be above the heat sink of the motherboard and beneath the coil.

For finishing and good looking stick sun-mica on it and make an appropriate cut for control panel in front side.

Now fit all the parts and tighten them with the screws. Also connect all the sockets and main lead to power supply.

Now adhere to the top glass with a small amount of fevicol. Remember that the surface of all four borders should not be covered by the top glass. Make some space for ventilation between top glass and the border surfaces.

Now a home made induction heater is ready to use.

 Powerful Induction Stove Circuit

Powerful Induction Stove Circuit

Some ideas, and experiment can be dangerous.

And for that you don't risk and damage your self

and the Environment, I am a professional in my business

With a lot of experience!

Every video, even that is completed with compliance

With all safety measures. Enjoy the video and eat the sweets.

WARNING:

This video is for demonstration and education purpose only.

Each demonstration presents risks and hazards

that must be fully understood before attempting.

And should be performed only by professionals

Make a very convenient and robust induction heater at home by watching this video

Make a frame according to the top plate size or as you think convenient.

After measuring the center make a horizontal plane to lay the coil on it.

Make appropriate fitting stands for the motherboard and cooling fan. Make sure the cooling fan must be above the heat sink of the motherboard and beneath the coil.

For finishing and good looking stick sun-mica on it and make an appropriate cut for control panel in front side.

Now fit all the parts and tighten them with the screws. Also connect all the sockets and main lead to power supply.

Now adhere to the top glass with a small amount of fevicol. Remember that the surface of all four borders should not be covered by the top glass. Make some space for ventilation between top glass and the border surfaces.

Now a home made induction heater is ready to use.