Post Top Ad

Saturday, December 9, 2023

How to make 3v-12v Battery Level Indicator circuit


 How to make 3v-12v Battery Level Indicator circuit

Today I am going to make a Battery level indicator that will show the percentage of up-to 15V Battery. This circuit is very easy to make and it is very cheap.


Solder all components in PCB according to this circuit diagram.


Insert all LEDs in PCB in series like circuit diagram.


Solder all wires of LEDs as solder in picture.


Now insert all resistors in pcb as inserted in the picture according to circuit diagram.


Next solder all wires of resistors as solder in picture according to circuit diagram.


Next solder voltage input wires as solder in picture according to circuit diagram.


Black wire is -ve and brown wire is +ve input DC power supply.

Now our battery level indicator circuit is ready. Now match circuit according to the circuit diagram and


Give input power supply to the circuit.


NOTE:We can give maximum 15V DC power supply to this circuit.


As in picture when I give above 13V DC input then all 5-LEDs are glowing.

As in all pictures we can see the different voltages Indicate different LEDs are glowing.


As in picture 1 show when I give above 2V then one LED is glowing,


When I give above 5V then two LEDs are glowing,


when I give 10V then 3-LEDs are glowing,


When I give above 13V then All 5-LEDs are glowing.


 How to make 3v-12v Battery Level Indicator circuit

Today I am going to make a Battery level indicator that will show the percentage of up-to 15V Battery. This circuit is very easy to make and it is very cheap.


Solder all components in PCB according to this circuit diagram.


Insert all LEDs in PCB in series like circuit diagram.


Solder all wires of LEDs as solder in picture.


Now insert all resistors in pcb as inserted in the picture according to circuit diagram.


Next solder all wires of resistors as solder in picture according to circuit diagram.


Next solder voltage input wires as solder in picture according to circuit diagram.


Black wire is -ve and brown wire is +ve input DC power supply.

Now our battery level indicator circuit is ready. Now match circuit according to the circuit diagram and


Give input power supply to the circuit.


NOTE:We can give maximum 15V DC power supply to this circuit.


As in picture when I give above 13V DC input then all 5-LEDs are glowing.

As in all pictures we can see the different voltages Indicate different LEDs are glowing.


As in picture 1 show when I give above 2V then one LED is glowing,


When I give above 5V then two LEDs are glowing,


when I give 10V then 3-LEDs are glowing,


When I give above 13V then All 5-LEDs are glowing.

No comments:

Post a Comment

Post Top Ad

Pages