on video 6 channel led chaser with bc547 || Chaser Circuit

 6 channel led chaser with bc547 || Chaser Circuit

In this video, we're going to learn how to build a 6 channel led Chaser Circuit using the BC547 LED Drivers. This circuit is great for practicing your patterning skills and is perfect for DIY projects.

If you're new to LED driving circuits, or just want to learn more about this particular Chaser Circuit, then this video is for you! By the end of this tutorial, you'll have everything you need to build this circuit yourself. Thanks for watching!

Today I am going to make an LED chaser circuit.Its effect is amazing.This circuit I will make using BC547 Transistor.

This is the circuit diagram of this project.

Connect all components according to this circuit diagram.

Solder +ve leg of all LEDs to the ring as you can see in the picture and circuit diagram.

Next we have to solder 220 ohm resistor to the -ve legs of LEDs as solder in the picture.

Next we have to connect transistors.

Solder collector pin of transistor to 220 ohm resistor as you can see in the picture.

Next we have to solder 10K resistors to the circuit.

Solder 10K Resistor between Base pin of transistors to +ve legs of all LEDs as you can see in the circuit diagram.

Next we have to connect emitter pins of all transistors together as solder in picture.

Solder capacitors to the circuit as given in the circuit diagram.

+ve pin of capacitor to Base pin of one transistor and -ve pin of capacitor to collector pin of other transistor as you can see in the picture.

Now we have to connect the battery clipper wire to the circuit.

Solder +ve wire of battery clipper to +ve of all LEDs and solder -ve wire of battery clipper to emmiter pin of transistors as given in the circuit diagram.

Now our circuit is ready so connect battery to battery clipper and see the nice effect of LED chaser.

 6 channel led chaser with bc547 || Chaser Circuit

In this video, we're going to learn how to build a 6 channel led Chaser Circuit using the BC547 LED Drivers. This circuit is great for practicing your patterning skills and is perfect for DIY projects.

If you're new to LED driving circuits, or just want to learn more about this particular Chaser Circuit, then this video is for you! By the end of this tutorial, you'll have everything you need to build this circuit yourself. Thanks for watching!

Today I am going to make an LED chaser circuit.Its effect is amazing.This circuit I will make using BC547 Transistor.

This is the circuit diagram of this project.

Connect all components according to this circuit diagram.

Solder +ve leg of all LEDs to the ring as you can see in the picture and circuit diagram.

Next we have to solder 220 ohm resistor to the -ve legs of LEDs as solder in the picture.

Next we have to connect transistors.

Solder collector pin of transistor to 220 ohm resistor as you can see in the picture.

Next we have to solder 10K resistors to the circuit.

Solder 10K Resistor between Base pin of transistors to +ve legs of all LEDs as you can see in the circuit diagram.

Next we have to connect emitter pins of all transistors together as solder in picture.

Solder capacitors to the circuit as given in the circuit diagram.

+ve pin of capacitor to Base pin of one transistor and -ve pin of capacitor to collector pin of other transistor as you can see in the picture.

Now we have to connect the battery clipper wire to the circuit.

Solder +ve wire of battery clipper to +ve of all LEDs and solder -ve wire of battery clipper to emmiter pin of transistors as given in the circuit diagram.

Now our circuit is ready so connect battery to battery clipper and see the nice effect of LED chaser.