A floatless relay is a type of water level sensor a device used to detect the level of liquid within a water tank the switch may be used to control a pump as an indicator an alarm or to control other devices one type of floatless relay uses a mercury switch inside a hinged float.
This video shows water pump automatic on off floatless relay wiring diagram. A pump is usually connected to a contactor, which in turn is connected to the Controller contact outputs. The Level Controller would automatically operate the pump, to control the liquid level in the tank.
How do I install a floatless relay to automatically shut off the water pump?
A floatless relay is a device used to sense the fluid level in a radiator and to send a signal to a switch or control other devices. A type of floatless relay uses mercury. hinged float change.
By this circuit I intend to describe how to create an auto manual drive circuit using two water tanks for a water motor.
It is possible to create a circuit like this using two water tanks in this way for a home and a factory.
There are two water tanks, the ground level tank as the sump tank and the elevated water distribution tank as the pump tank.
The two float switches used for this purpose should be connected as shown in the circuit. This type of float switch can be used for this purpose.
You can use auto / manual switch as per your requirement which is useful for emergencies.
If the motor is less than 2 Hose Power, a 30A Relay can be used instead of the contactor.
It is mandatory to have overload protection for the motor.
A floatless relay is a type of water level sensor a device used to detect the level of liquid within a water tank the switch may be used to control a pump as an indicator an alarm or to control other devices one type of floatless relay uses a mercury switch inside a hinged float.
This video shows water pump automatic on off floatless relay wiring diagram. A pump is usually connected to a contactor, which in turn is connected to the Controller contact outputs. The Level Controller would automatically operate the pump, to control the liquid level in the tank.
How do I install a floatless relay to automatically shut off the water pump?
A floatless relay is a device used to sense the fluid level in a radiator and to send a signal to a switch or control other devices. A type of floatless relay uses mercury. hinged float change.
By this circuit I intend to describe how to create an auto manual drive circuit using two water tanks for a water motor.
It is possible to create a circuit like this using two water tanks in this way for a home and a factory.
There are two water tanks, the ground level tank as the sump tank and the elevated water distribution tank as the pump tank.
The two float switches used for this purpose should be connected as shown in the circuit. This type of float switch can be used for this purpose.
You can use auto / manual switch as per your requirement which is useful for emergencies.
If the motor is less than 2 Hose Power, a 30A Relay can be used instead of the contactor.
It is mandatory to have overload protection for the motor.
No comments:
Post a Comment