Post Top Ad

Sunday, September 10, 2023

on video How to Twist electric wire | Proper Joint Of Electric Wire

How to Twist electric wire | Properly joint Electrical Wire Tips And Tricks | electric wire | wire twisting tips | wire joint | Awesome idea! How to Twist Electric Wire Together | How to Twist Electric Wire Together & Useful Tricks | Harris Engineer

The most reliable joint that I have used for a long time. This technique consists of knotting the strings and then a bend-based twist. It's better to solder electric wires, of course, but sometimes it's not possible or inadvisable. So, let's connect stripped wire ends with our hands only.


There is a step-by-step comic strip, what to do. 12 steps:


Use any wire stripper to get off 5.5 cm of isolation. For both ends.

The last piece of isolation use to spin cores to get more convenient solid core.

5.5 cm.

Loop one wire and pass another through it.

Pass the second core further from behind the loop and thread then into the loop.

Tighten up the knot drawing all 4 cores.

The result.

Now we have extremely rupture of connection strength.

But there is a problem: no fixed connection when contracting wires.

Well, bend the tails backwards. It clamps the loops.

Then rotate the tails around the cores. 3 winds for this length.

The result. Very robust but flexible connection.



 

How to Twist electric wire | Properly joint Electrical Wire Tips And Tricks | electric wire | wire twisting tips | wire joint | Awesome idea! How to Twist Electric Wire Together | How to Twist Electric Wire Together & Useful Tricks | Harris Engineer

The most reliable joint that I have used for a long time. This technique consists of knotting the strings and then a bend-based twist. It's better to solder electric wires, of course, but sometimes it's not possible or inadvisable. So, let's connect stripped wire ends with our hands only.


There is a step-by-step comic strip, what to do. 12 steps:


Use any wire stripper to get off 5.5 cm of isolation. For both ends.

The last piece of isolation use to spin cores to get more convenient solid core.

5.5 cm.

Loop one wire and pass another through it.

Pass the second core further from behind the loop and thread then into the loop.

Tighten up the knot drawing all 4 cores.

The result.

Now we have extremely rupture of connection strength.

But there is a problem: no fixed connection when contracting wires.

Well, bend the tails backwards. It clamps the loops.

Then rotate the tails around the cores. 3 winds for this length.

The result. Very robust but flexible connection.



 

No comments:

Post a Comment

Post Top Ad

Pages