Post Top Ad

Sunday, July 23, 2023

on video 3 Phase SSR ON and OFF by using Proximity Sensor


 what is Solid State Relay ?

      Solid State Relays are semiconductor equivalents of the electromechanical relay and can be used to control electrical loads without the use of moving parts

Features of celduc®’s range of 3-phase Solid State Relays

celduc’s three-phase Solid State Relays are available in panel mount and DIN rail mount, with a wide range that can handle up to 125 amps/690 VAC.


Sightpac (45mm installation width) and cel3pac (100mm installation width) Series are designed to switch various loads such as heating elements, motors and transformers.


Various models are capable of handling resistive loads up to 64A and motor loads up to 32A when used with a suitable heatsink. These relays have a built-in VDR or TVS, depending on models, which secures transient protection for heavy industrial applications. Our 3-phase SSRs are available in both AC and DC control versions with a built-in LED status indication.

Here are the main products features

Up to 125A / 690Vac

AC or DC input voltage

Zero voltage control (zero cross relay) or instantaneous control (random relay)

3-phase control with 2 or 3 phases switched

Versions with internal protection by RC snubber are available

Overvoltage protection is available as either a VDR (MOV) connected across the output terminals of the SSR or a TVS in series with the gates of the thyristor

Green LED used to indicate input status

Compliance with cURus, CE, UKCA, S-Mark and EAC Standards

Configuration 1 : On the power side we offer standard connection with screws and on the control side we offer pluggable connector for easy and fast connections.

Configuration 2 : Connection on the power side is with spring connectors (“push-in” spring type double connectors) which is a simple connection without physical constraint and  without tools. And connection on the control side is with a pluggable connector.

Configuration 1 : Connection on the power side and control side with screws. The size of terminals on the power side is up to 50mm² (AWG0 / AWG1), which increases the switching current limits to higher levels than  other SSRs on the market.

Configuration 2 : Connection on the power side with M5 screws and connection on the control side with 4-pole pluggable connector

Configuration 3 : Connection on the power side with spring connectors for Fast wiring, even in tight spaces (Wiring 100% secure, 70% faster). And connection on the control side with 4-pole pluggable connector



 what is Solid State Relay ?

      Solid State Relays are semiconductor equivalents of the electromechanical relay and can be used to control electrical loads without the use of moving parts

Features of celduc®’s range of 3-phase Solid State Relays

celduc’s three-phase Solid State Relays are available in panel mount and DIN rail mount, with a wide range that can handle up to 125 amps/690 VAC.


Sightpac (45mm installation width) and cel3pac (100mm installation width) Series are designed to switch various loads such as heating elements, motors and transformers.


Various models are capable of handling resistive loads up to 64A and motor loads up to 32A when used with a suitable heatsink. These relays have a built-in VDR or TVS, depending on models, which secures transient protection for heavy industrial applications. Our 3-phase SSRs are available in both AC and DC control versions with a built-in LED status indication.

Here are the main products features

Up to 125A / 690Vac

AC or DC input voltage

Zero voltage control (zero cross relay) or instantaneous control (random relay)

3-phase control with 2 or 3 phases switched

Versions with internal protection by RC snubber are available

Overvoltage protection is available as either a VDR (MOV) connected across the output terminals of the SSR or a TVS in series with the gates of the thyristor

Green LED used to indicate input status

Compliance with cURus, CE, UKCA, S-Mark and EAC Standards

Configuration 1 : On the power side we offer standard connection with screws and on the control side we offer pluggable connector for easy and fast connections.

Configuration 2 : Connection on the power side is with spring connectors (“push-in” spring type double connectors) which is a simple connection without physical constraint and  without tools. And connection on the control side is with a pluggable connector.

Configuration 1 : Connection on the power side and control side with screws. The size of terminals on the power side is up to 50mm² (AWG0 / AWG1), which increases the switching current limits to higher levels than  other SSRs on the market.

Configuration 2 : Connection on the power side with M5 screws and connection on the control side with 4-pole pluggable connector

Configuration 3 : Connection on the power side with spring connectors for Fast wiring, even in tight spaces (Wiring 100% secure, 70% faster). And connection on the control side with 4-pole pluggable connector


No comments:

Post a Comment

Post Top Ad

Pages