Post Top Ad

Wednesday, June 7, 2023

on video How to make Wireless Water Level Indicator with Alarm


 Water Level Indicator With Alarm

Today I am going to talk about a very useful project that I had taken up. It is called the Water Level Indicator. Nowadays everybody has an overhead tank at their homes. But everyone who has a water tank above knows the kind of problems that they face. Firstly there is no system to track the water in the tank. Then there come a secondary problem that is when their water pump is started they have no idea when it gets filled up and sometimes there is a situation where the pump keeps on pumping water to the tank and the water starts spilling out from the tank. There is wastage of energy as well as wastage of water.

This project that I had taken up is the result of long hours of research of work on the Internet as well as long hours of thinking. I had made various versions of the projects earlier but at last i came up with this final product. I bet this has been tested and I can now firmly say that the model would work flawlessly without any complaints for years. I am saying this as I have installed these models to various houses in my neighborhood and all are working fine without any maintenance. And indeed this model is admired by all who use it.

The house where I live in has an overhead tank which is about 30 feet from the ground level. I was getting bored going up the rooftop to check whether the tank has filled or the water level was below to start the pump. I had to do this again and again. Then I sought for a solution. I always used to think of the possibilities of how this problem can be tackled in an electronic way. After years of research and by trial and error, I found one and wanted to put whatever I have done out here so that it may be helpful to someone who has an overhead water tank at their homes.


 Water Level Indicator With Alarm

Today I am going to talk about a very useful project that I had taken up. It is called the Water Level Indicator. Nowadays everybody has an overhead tank at their homes. But everyone who has a water tank above knows the kind of problems that they face. Firstly there is no system to track the water in the tank. Then there come a secondary problem that is when their water pump is started they have no idea when it gets filled up and sometimes there is a situation where the pump keeps on pumping water to the tank and the water starts spilling out from the tank. There is wastage of energy as well as wastage of water.

This project that I had taken up is the result of long hours of research of work on the Internet as well as long hours of thinking. I had made various versions of the projects earlier but at last i came up with this final product. I bet this has been tested and I can now firmly say that the model would work flawlessly without any complaints for years. I am saying this as I have installed these models to various houses in my neighborhood and all are working fine without any maintenance. And indeed this model is admired by all who use it.

The house where I live in has an overhead tank which is about 30 feet from the ground level. I was getting bored going up the rooftop to check whether the tank has filled or the water level was below to start the pump. I had to do this again and again. Then I sought for a solution. I always used to think of the possibilities of how this problem can be tackled in an electronic way. After years of research and by trial and error, I found one and wanted to put whatever I have done out here so that it may be helpful to someone who has an overhead water tank at their homes.

No comments:

Post a Comment

Post Top Ad

Pages