Post Top Ad

Wednesday, March 29, 2023

on video 12v Battery Charger Circuit With Auto Cut Off/ Auto Cut Off 12v Battery Charger/ 12v Battery Charger


 what is auto cut off battery charger?


some off charger maybe can't stop charging when the battery is fully charged.

so we want to show you a simple circuit for the charger when the battery is fully charged, the charging automatically stopping,


this is a circuit of the auto cut off battery charger, it has only:-


- one NPN transistor such as c1815 for controlling the charging,


- relay for cutting off this current path through the battery after fully charged,


- 10 kilo-ohm variable resistor connected to the base of the transistor,


the variable resistor used for restricting the voltage from how many volts you want to stop charging!


12v Battery Charger circuit with Overcharge Protection

This 12 battery charger circuit provides the Automatic cut-off facility when the battery gets fully charged. Before the use of this circuit, you need to adjust the Cut off voltage range for the auto cut. This adjustment is done by the moving 10k preset, and for testing of output voltage auto cut range a multimeter connected with the output terminals that go to the battery. This voltage range can be set by using any 13v or 14v DC supply which connects the terminals which go to the battery. And move the preset till the green led ON. Once the auto cut voltage is set, the circuit is ready to use. 


One terminal of Input AC power to Transformer connected through 12 V Relay. When Battery needs charge then Red Led glow, When the Charge level goes to about above 12v or 13v then the Red LED will OFF and the Green LED will Glow. And Input Power to the Transformer of charger is also Disconnected by Relay. 


12v battery charger with auto cut off circuit diagram

One 555 timer ic is used for detecting the voltage level and Relay is used to disconnect the AC input. 7808 voltage regulator is used for constant supply to the operation of the circuit to cut at a required fixed voltage.

This 12v battery charger Automatic cut circuit after a full charge and provides 6 Ampere high current and this can use for a big size Lead-acid Battery up to 100 AH. If you want to more high current then replace the transformer with 10A and use 10A10 Diode. You can use a readymade 12v  10 A Bridge Rectifier which is available in the market.


 what is auto cut off battery charger?


some off charger maybe can't stop charging when the battery is fully charged.

so we want to show you a simple circuit for the charger when the battery is fully charged, the charging automatically stopping,


this is a circuit of the auto cut off battery charger, it has only:-


- one NPN transistor such as c1815 for controlling the charging,


- relay for cutting off this current path through the battery after fully charged,


- 10 kilo-ohm variable resistor connected to the base of the transistor,


the variable resistor used for restricting the voltage from how many volts you want to stop charging!


12v Battery Charger circuit with Overcharge Protection

This 12 battery charger circuit provides the Automatic cut-off facility when the battery gets fully charged. Before the use of this circuit, you need to adjust the Cut off voltage range for the auto cut. This adjustment is done by the moving 10k preset, and for testing of output voltage auto cut range a multimeter connected with the output terminals that go to the battery. This voltage range can be set by using any 13v or 14v DC supply which connects the terminals which go to the battery. And move the preset till the green led ON. Once the auto cut voltage is set, the circuit is ready to use. 


One terminal of Input AC power to Transformer connected through 12 V Relay. When Battery needs charge then Red Led glow, When the Charge level goes to about above 12v or 13v then the Red LED will OFF and the Green LED will Glow. And Input Power to the Transformer of charger is also Disconnected by Relay. 


12v battery charger with auto cut off circuit diagram

One 555 timer ic is used for detecting the voltage level and Relay is used to disconnect the AC input. 7808 voltage regulator is used for constant supply to the operation of the circuit to cut at a required fixed voltage.

This 12v battery charger Automatic cut circuit after a full charge and provides 6 Ampere high current and this can use for a big size Lead-acid Battery up to 100 AH. If you want to more high current then replace the transformer with 10A and use 10A10 Diode. You can use a readymade 12v  10 A Bridge Rectifier which is available in the market.

No comments:

Post a Comment

Post Top Ad

Pages