on video Comment mettre a niveau un module abaisseur de 3 amperes à 60 amperes

 Comment mettre a niveau un module abaisseur de 3 amperes à 60 amperes

Protections

Short circuit protection: Yes (currently constant current value)

Over temperature protection: Yes (automatically turn off the output if over-temperature)

Input reverse polarity protection: Yes

Output anti-backflow: Yes

Voltage calibration

If you find that the voltage reading is not accurate, please do as follows:

In the state of power off, hold press the “SET” button and power on to enter the voltage calibration mode, at this time the LCD screen starts to flash.

Then release the “SET” button, press the “SET” button to increase voltage value while pressing the “ENT” button to reduce, until the input voltage value is correct. e.g. If the input voltage is 12.65V, adjust the voltage value to 12.65V.

It will automatically be saved after 2 seconds, then power off the module to finish calibration.

 Comment mettre a niveau un module abaisseur de 3 amperes à 60 amperes

Protections

Short circuit protection: Yes (currently constant current value)

Over temperature protection: Yes (automatically turn off the output if over-temperature)

Input reverse polarity protection: Yes

Output anti-backflow: Yes

Voltage calibration

If you find that the voltage reading is not accurate, please do as follows:

In the state of power off, hold press the “SET” button and power on to enter the voltage calibration mode, at this time the LCD screen starts to flash.

Then release the “SET” button, press the “SET” button to increase voltage value while pressing the “ENT” button to reduce, until the input voltage value is correct. e.g. If the input voltage is 12.65V, adjust the voltage value to 12.65V.

It will automatically be saved after 2 seconds, then power off the module to finish calibration.