Post Top Ad

Wednesday, January 11, 2023

on video Water Pump Motor Wiring Diagram


 Automatic water level controllers are devices used to automatically control a motor that helps ensure a constant supply of water in a storage tank.

they work with probes to indicate water levels in the storage tank.

  These sensors send information back to the controller to start or stop the pump.

this controller can be programmed to operate automatically or manually.

In AUTO mode, the device works with probes.

The reference probe located at the lowest point you want the water level to go to before the water starts to fill again.

The start fill probe is usually the same length as the reference probe to ensure that the pump begins to fill with water once it has reached its lowest point.

The fill stop sensor stops the motor when the water level is full.

In MANUAL mode, the pump will run continuously.



 Automatic water level controllers are devices used to automatically control a motor that helps ensure a constant supply of water in a storage tank.

they work with probes to indicate water levels in the storage tank.

  These sensors send information back to the controller to start or stop the pump.

this controller can be programmed to operate automatically or manually.

In AUTO mode, the device works with probes.

The reference probe located at the lowest point you want the water level to go to before the water starts to fill again.

The start fill probe is usually the same length as the reference probe to ensure that the pump begins to fill with water once it has reached its lowest point.

The fill stop sensor stops the motor when the water level is full.

In MANUAL mode, the pump will run continuously.


No comments:

Post a Comment

Post Top Ad

Pages